Pneumatech PH 55-550S Adsorption dryers

PH heatless adsorption dryers use dry, expanded purge air to remove moisture from the desiccant material.

Combining high-quality components, PH heatless chemical dryers provide clean, dry air to extend the life of your equipment and products. Non-heating chemical dryers use compressed air to remove all moisture from the desiccant material.

High-quality, high-efficient desiccant selected for the right application

Spring-loaded cartridges, minimizing the risk of crushed desiccant

Counter-current regeneration for optimal energy efficiency and guaranteed dry air

Related product groups

Protect your system and the environment.

CAD 6 - 1400 Series Gas Cooled Dryers

All of our CAD 6 - 1400 series gas cooled dryers are equipped with capacitive condensation drainage, which uses electronic sensors to save energy and discharge condensation only without wasting any compressed air.

COOL 6 to 130 series gas cooled dryers

The Cool 6-130 series gas-cooled dryers use refrigerant gas to cool compressed air. As a result, the water in the air condenses and can be removed by automatic draining. With this technique, the pressure dew point of 5°C can be reached thanks to the COOL 6-130 dryers.

Line Filters

Genuine line filters offer durability while maintaining the performance of your compressor. The air in the atmosphere naturally contains a variety of impurities, such as dust, various hydrocarbons, and water in the form of moisture. When the air is compressed, their concentration increases. As a result, these contaminants enter the compressed air circuit and cause wear and corrosion in downstream equipment. Ekomak pressure line filters separate these contaminants from the compressed air.

air vessels

Air tanks are a very important part of your compressed air system. It is necessary for any application that uses compressed air. In addition to the air storage function, installing an air tank allows to dampen unstable pressure peaks, prevent unnecessary start-stops of the compressor, and reduce the risk of condensation.

Pneumatech PH 55-550S Adsorption dryers

High-quality, high-efficient desiccant selected for the right application

Spring-loaded cartridges, minimizing the risk of crushed desiccant

Counter-current regeneration for optimal energy efficiency and guaranteed dry air

Related product groups

CAD 6 - 1400 Series Gas Cooled Dryers

COOL 6 to 130 series gas cooled dryers

Line Filters

air vessels

Enterprise

Products

After Sales Service and parts

Ekomak Industrial compressor and Machinery industry Trade Inc.